文章摘要
魏明福,刘美红,李遇贤,葛夏文,孙岩.一种无石棉金属缠绕垫片压紧应力的解析算法[J].润滑与密封,2014,39(4):79-82
一种无石棉金属缠绕垫片压紧应力的解析算法
  
DOI:10.3969/j.issn.0254-0150.2014.04.015
中文关键词: 解析算法  压紧应力  螺栓法兰系统  缠绕垫片
英文关键词: analytical algorithm  compressive stress  bolted flanged systems  spiral wound gasket
基金项目:国家自然科学基金项目(51165014);云南省科技计划项目(2012FB130);云南省教育厅科学研究基金项目(2012Y540)
作者单位E-mail
魏明福 昆明理工大学 mingfu_wei@163.com 
刘美红 昆明理工大学  
李遇贤 昆明理工大学  
葛夏文 昆明理工大学  
孙岩 昆明理工大学  
摘要点击次数: 915
全文下载次数: 0
中文摘要:
      在螺栓法兰系统中,垫片的局部压紧应力比平均压紧应力对法兰连接可靠性的影响更大,而现有的试验技术无法确定垫片上局部应力的分布情况。考虑内压时的法兰转角和垫片的力学性能,提出垫片径向压紧应力分布的解析算法。解析法计算的结果与数值模拟得到的应力分布基本一致,虽然垫片内缘应力值的解析计算结果较数值模拟果偏小,但仍满足工程近似计算的精度要求。分析结果表明,垫片径向压紧应力不是均匀分布的,而是由垫片内缘向外缘逐渐增大。
英文摘要:
      For bolt flange connection system, flange connection reliability is more influenced by local compressive stress rather than mean compressive stress. Nevertheless, the stress distribution on gasket cannot be determined by current technique experimentally. An analytical solution of stress radial distribution on gasket was proposed by considering the influence of internal pressure on the mechanical property of flange rotating angle and gasket. The result of analytical solution and numerical solution is consistent, and although the stress value on the inner rim of gasket by analytical solution is less that that by numerical solution, the error between them meets the requirement of engineering accuracy. The analytical result shows that the stress on gasket is in nonuniform distribution in radial direction, it is increased from inner rim to outer rim.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮